Hot water cylinder supply and fit from £600. Vented and unvented cylinders. Immersion heater replacement from £150. G3 qualified engineers. Free survey across Formby L37 and surrounding Sefton postcodes.
Fixed prices. Free site survey to confirm exact specification and price. All installations include cylinder, fittings and commissioning across all L37 and surrounding postcodes.
Formby's larger properties have specific hot water demands that older vented systems cannot meet. Here is what drives most L37 cylinder work.
Larger 4 and 5 bedroom Formby properties with two or three bathrooms frequently experience hot water pressure problems when multiple outlets are used simultaneously. The root cause is almost always a vented gravity-fed cylinder system, which delivers pressure based on the height difference between the loft tank and the outlet and that pressure is shared across every outlet drawing hot water at the same time.
An unvented cylinder is fed directly from the mains and delivers hot water at mains pressure to every outlet simultaneously. Running a shower, a bath and the hot kitchen tap at the same time is not a problem with a properly sized unvented system. For a typical 4 bedroom Formby property, a 200 to 250 litre unvented cylinder is usually the right specification. We size the cylinder correctly at the free survey based on the property's bathroom count and hot water demand.
Formby is an active area for loft conversions, and many of these projects require the cold water storage tank to be removed from the loft space to maximise usable headroom and floor area. If the home has a vented hot water system fed from this loft tank, removing the tank requires converting the system to an unvented cylinder. This is a G3 regulated installation it cannot be carried out by a general plumber without the specific qualification. Our engineers are G3 qualified. We co-ordinate with your loft conversion contractor to ensure the cylinder work is timed correctly within the project, and we issue the G3 commissioning certificate and notify Building Control on completion. Unvented cylinder supply and fit from £900.
When adding an en suite to a Formby master bedroom, the hot water system needs to be capable of supplying the new bathroom at adequate pressure alongside all existing bathrooms. If the existing system is vented, adding a third bathroom often exposes the pressure limitations of the gravity-fed system. We assess the hot water system capacity at the free survey for every Formby bathroom installation and advise whether the existing cylinder is adequate or whether an unvented upgrade is the right move. En suite installation and unvented cylinder upgrade can be combined in a single fixed-price project for maximum convenience.
The right cylinder for your Formby home depends on the number of bathrooms, renovation plans and current pressure. We advise at the free survey.
Fed from a cold water storage tank in the loft. Low pressure. Suitable for Formby properties with one bathroom where mains pressure performance is not required and the loft tank system is intact. Supply and fit from £600.
Fed directly from the mains, delivering hot water at mains pressure simultaneously to every bathroom in the property. The right choice for Formby 4 and 5 bedroom properties, loft conversion projects and any property adding an en suite. G3 qualified installation required by law. Supply and fit from £900.
When the cylinder is in good condition but the element has failed. Element replacement from £150 typically restores hot water on the same visit. We confirm whether the cylinder is in adequate condition to justify the element replacement or whether full replacement is the more economical approach.
The most common type in Formby homes with system or regular boilers. Heated via a heat exchanger coil from the central heating boiler. Available in both vented and unvented configurations depending on the property's pressure requirements.
Unvented hot water cylinder installation is a legally regulated activity that cannot be carried out without the specific G3 qualification.
Under Building Regulations Part G, the installation of an unvented hot water cylinder must be carried out by a competent person holding the G3 qualification or notified to Building Control. An unvented cylinder operates at mains pressure with water temperatures up to 65 degrees. Without correctly installed and tested safety devices including a temperature and pressure relief valve, expansion vessel and tundish the cylinder can become a serious safety risk.
All our engineers who install unvented cylinders in Formby hold the G3 qualification. Every unvented installation is notified to Building Control on completion and you receive a commissioning certificate. The G3 commissioning certificate is also required by most cylinder manufacturers to validate the product warranty. A cylinder installed without G3 certification may have a voided warranty. Do not allow any Formby-area plumber to install an unvented cylinder without first confirming their G3 qualification at gassaferegister.co.uk.
The cylinder is undersized for Formby's larger properties with multiple bathrooms. An unvented cylinder properly sized for the property eliminates this problem permanently.
A leaking cylinder must be replaced. A drip from a valve or fitting can sometimes be resolved without replacing the cylinder. We diagnose on the visit before quoting any work.
Failing immersion element, corroded heat exchanger coil or faulty thermostat. We diagnose the cause and give you an honest assessment before recommending repair or replacement.
Most hot water cylinders have a working life of 15 to 25 years. A Formby cylinder over 20 years old is at increasing risk of failure. Proactive replacement from £600 is considerably cheaper than emergency water damage repair.
A vented gravity-fed system cannot deliver mains-pressure hot water simultaneously to multiple bathrooms. Upgrading to an unvented cylinder from £900 resolves this permanently.
Limescale build-up on the immersion element or heat exchanger, or air in the system. Often resolved with element replacement. We assess on the visit before recommending what is needed.
Not sure whether your Formby cylinder needs repair or replacement? We diagnose on the visit before recommending any work.
CALL 07399 676656Both vented and unvented cylinder installations by our own G3 qualified engineers. All unvented installations notified to Building Control on completion. G3 commissioning certificate issued on the day.
We size the cylinder correctly for your Formby property's bathroom count and hot water demand at the free survey. The right size cylinder specified before any work begins, not discovered to be inadequate after installation.
Unvented cylinder upgrade combined with en suite bathroom installation or loft conversion tank removal in a single fixed-price project. One team, one invoice, no separate contractor to co-ordinate.
We visit your Formby property, assess your system and provide a written fixed-price quote. No surprises on the invoice. L37 and all surrounding Sefton postcodes covered.
New unvented cylinder fitted in our Formby house. Three bathrooms now running simultaneously with no pressure drop whatsoever. The G3 commissioning certificate was issued the same day, Building Control notified the same week. The water pressure throughout the house has completely transformed. Should have done this years ago. Exceptional work from Ideal.
Unvented cylinder installed as part of our Formby loft conversion. Ideal co-ordinated with our loft builder perfectly removed the old cold water tank and vented cylinder, fitted the new unvented cylinder and commissioned it all within the same week the builders needed it done. G3 certificate issued on the day. Everything went to plan with no delays to the conversion project.
Old immersion heater element failed in our Formby property. Called Ideal in the morning and they were with us by early afternoon. Replaced the element and thermostat, tested everything and were done within two hours. They confirmed the cylinder itself is still in good condition and will last several more years. Honest assessment, no unnecessary upselling. Good pricing, great service.
A vented indirect cylinder supply and fit starts from £600. An unvented cylinder starts from £900. Immersion heater replacement from £150. Prices depend on cylinder capacity, type and access. Free fixed-price quote after a site visit. L37 and surrounding postcodes covered.
Multiple bathrooms with poor simultaneous pressure is almost always caused by a vented gravity-fed system. The solution is an unvented cylinder from £900, which delivers hot water at mains pressure to every bathroom simultaneously. We size the cylinder correctly for your property at the free survey and include all safety devices, Building Regulations notification and G3 commissioning certificate.
Yes, if your current hot water system is vented and fed from the loft tank. Removing the tank means the existing vented cylinder can no longer work as designed. It must be converted to an unvented cylinder from £900. This is a G3 regulated installation. We co-ordinate with loft conversion builders and ensure the cylinder work is timed correctly within the project. G3 commissioning certificate issued on completion.
Yes. Ideal Plumbing Solutions is Gas Safe registered. All cylinder installations carried out by our own directly employed engineers. G3 qualified for all unvented installations. We never use sub-contractors. Verify at gassaferegister.co.uk.
All Gas Safe registered. G3 qualified. L37 and surrounding postcodes covered.
Vented from £600. Unvented from £900. G3 qualified. Gas Safe registered. All postcodes covered.
Vented from £600. Unvented from £900. Immersion heater from £150. G3 qualified. Gas Safe registered. Free survey. Formby L37 and surrounding postcodes.
Gas emergency? Call Cadent Gas on 0800 111 999 first, then call us.